Industry Acronyms and Terms
ITU Glossary of Mobile Cellular Terms
UMTS Forum : Glossary of Terms
FCC's Glossary of Telecommunications Terms
Wireless Industry Terms from WirelessWeek
Sources: www.itu.int
7:59 AM | Categories technology | 0 Comments
Cellular Standards for the Third Generation: The ITU's IMT-2000 family
Cellular Standards for the Third Generation:
The ITU's IMT-2000 family
The ITU's IMT-2000 family
It is in the mid-1980s that the concept for IMT-2000, “International Mobile Telecommunications”, was born at the ITU as the third generation system for mobile communications. After over ten years of hard work under the leadership of the ITU, a historic decision was taken in the year 2000 : unanimous approval of the technical specifications for third generation systems under the brand IMT-2000. The spectrum between 400 MHz and 3 GHz is technically suitable for the third generation. The entire telecommunication industry, including both industry and national and regional standards-setting bodies gave a concerted effort to avoiding the fragmentation that had thus far characterized the mobile market. This approval meant that for the first time, full interoperability and interworking of mobile systems could be achieved. IMT-2000 is the result of collaboration of many entities, inside the ITU (ITU-R and ITU-T), and outside the ITU (3GPP, 3GPP2, UWCC and so on)
IMT-2000 offers the capability of providing value-added services and applications on the basis of a single standard. The system envisages a platform for distributing converged fixed, mobile, voice, data, Internet and multimedia services. One of its key visions is to provide seamless global roaming, enabling users to move across borders while using the same number and handset. IMT-2000 also aims to provide seamless delivery of services, over a number of media (satellite, fixed, etc…). It is expected that IMT-2000 will provide higher transmission rates: a minimum speed of 2Mbit/s for stationary or walking users, and 348 kbit/s in a moving vehicle. Second-generation systems only provide speeds ranging from 9.6 kbit/s to 28.8 kbit/s.
In addition, IMT-2000 has the following key characteristics:
1. Flexibility
With the large number of mergers and consolidations occurring in the mobile industry, and the move into foreign markets, operators wanted to avoid having to support a wide range of different interfaces and technologies. This would surely have hindered the growth of 3G worldwide. The IMT-2000 standard addresses this problem, by providing a highly flexible system, capable of supporting a wide range of services and applications. The IMT-2000 standard accommodates five possible radio interfaces based on three different access technologies (FDMA, TDMA and CDMA):

Value-added services and worldwide applications development on the basis of one single standard
accommodating five possible radio interfaces based on three technologies
accommodating five possible radio interfaces based on three technologies
2. Affordability
There was agreement among industry that 3G systems had to be affordable, in order to encourage their adoption by consumers and operators.
3. Compatibility with existing systems
IMT-2000 services have to be compatible with existing systems. 2G systems, such as the GSM standard (prevalent in Europe and parts of Asia and Africa) will continue to exist for some time and compatibility with these systems must be assured through effective and seamless migration paths.
4. Modular Design
The vision for IMT-2000 systems is that they must be easily expandable in order to allow for growth in users, coverage areas, and new services, with minimum initial investment.
7:55 AM | Categories technology | 0 Comments
Cellular Standards for 1G and 2G
Cellular Standards for 1G and 2G
Each generation of mobile communications has been based on a dominant technology, which has significantly improved spectrum capacity. Until the advent of IMT-2000, cellular networks had been developed under a number of proprietary, regional and national standards, creating a fragmented market.
First Generation:
1) Advanced Mobile Phone System (AMPS) was first launched in the US. It is an analog system based on FDMA (Frequency Division Multiple Access) technology. Today, it is the most used analog system and the second largest worldwide.
2) Nordic Mobile Telephone (NMT) was mainly developed in the Nordic countries. (4.5 million in 1998 in some 40 countries including Nordic countries, Asia, Russia, and other Eastern European Countries)
3) Total Access Communications System (TACS) was first used in the UK in 1985. It was based on the AMPS technology.
There were also a number of other proprietary systems, rarely sold outside the home country.
Second Generation:
1) Global System for Mobile Communications (GSM) was the first commercially operated digital cellular system. It was first developed in the 1980s through a pan-European initiative, involving the Eureopean Commission, telecommunications operators and equipment manufacturers. The European Telecommunications Standards Institute was responsible for GSM standardization. GSM uses TDMA (Time Division Multiple Access) technology. It is being used by all European countries, and has been adopeted in other continents. It is the dominant cellular standard today, with over (45%) of the world’s subscribers at April 1999.
2) TDMA IS-136 is the digital enhancement of the analog AMPS technology. It was called D-AMPS when it was fist introduced in late 1991 and its main objective was to protect the substantial investment that service providers had bmade in AMPS technology. Digital AMPS sevices have been launched in some 70 countries worldwide (by March 1999, there were almost 22 million TDMA handsets in circulation, the dominant markets being the Americas, and parts of Asia)
3) CDMA IS-95 increases capacity by using the entire radio band with each using a unique code (CDMA or Code Division Multiple Access) . It is a family of digital communication techniques and South Korea is the largest single CDMA IS-95 market in the world.
4) Personal Digital Cellular (PDC) is the second largest digital mobile standard although it is exclusively used in Japan where it was introduced in 1994. Like GSM, it is based on the TDMA access technology. In November 2001, there were some 66.39 million PDC users in Japan.
5) Personal Handyphone System (PHS) is a digital system used in Japan, first launched in 1995 as a cheaper alternative to cellular systems. It is somewhere in between a cellular and a cordless technology. It has inferior coverage area and limited usage in moving vehicles. In November 2001, Japan had 5.68 million PHS subscribers.
Sources: www.itu.int
7:52 AM | Categories technology | 0 Comments

